What are precautions to be carried out at Start in Steam Boilers?

　　Hydraulic should be carried out at a defined pressure before the start of a boiler.

　　Check if the pump inlets are open at the start of a boiler.

　　Install an automatic ash removal system such as rotary valves in a boiler so as to prevent the accumulation of ash in a furnace or other equipment. The accumulation may result in the blockage or excessive heating of boiler parts resulting in its failure.

　　Pump priming must be done at the start of the boiler.

　　All loose and wrong connections must be checked and make sure to rectify the connections before starting your boiler.

　　A trained and a technical boiler operator must be hired for operating your boiler.