6 Ton Coal Fired Steam Boiler Manufacturer

SZL6-1.25-AⅡ coal-fired steam boiler is a double-drums shop assembled chain grate boiler, rated evaporation 6t/h, rated steam pressure 1.25MPa. The steam temperature is saturated temperature and the fuel is anthracite Class III. The water cooling wall is set in three sides of the furnace and combustion chamber and convection tubes is set behind the after-combustion chamber. At the rear, there are cast iron economizer and air-preheater. The exhaust gas passes the furnace, after-combustion chamber, convection tubes, economizer, air-preheater and goes into the rear flue, and then passes the dust remover, ID fan, chimney and goes into the air.

The specification of 6 ton coal fired steam boiler

Rated output: 6t/h

Rated pressure: 1.25Mpa

Rated temperature: 194℃

Feeding water temperature: 105℃

Cold air temperature: 30℃

The radiant heating surface: 21.43㎡

The convection heating surface: 122.88㎡

The temperature of the flue gas: 160℃

The design efficient: 82.8%

The water volume of the boiler: 5.4m3

The heating surface of the economizer: 78.48m2

The total electric consumption : 62.85KW

The fuel consumption: 853kg/h

The safety range of operation load: 80%-100%

Double-drum coal fired steam boiler structure

The boiler leaves the factory in two parts: the upper part includes the boiler proper, upper steel frame and upper furnace wall and the lower part includes coal bucket, chain grate, lower furnace wall and inner ventilating duct. Except the front and back arch and part of the brick walls are installed at site, the remaining parts all leave the factory in shop assembled form. The rear matching economizer, air-preheater and ventilating duct leave the factory together with the boiler.